Double Glazed Window Repair
It's worth looking over the warranty that comes with the majority of double-glazed windows. It generally covers any problems with the window hardware such as hinges and locking mechanisms in the first 10 years.
Mist in between glass windows is usually caused by a breach in the seal and needs to be repaired quickly to prevent damp or mould developing in your property.
Condensation Between the Windows
If condensation forms between windows in your home, it's an indicator that the seal that holds the gas that insulates between the panes has failed. This could be a major issue that needs to be dealt with as soon as possible especially in winter when humidity is at its highest. It can also cause damage around the sills and sealant, or even mould or mildew.
Ideally double-glazed windows shouldn't be able to experience condensation between the panes. However, it's not unusual to have extreme humidity or a cold snap to cause this issue. Fortunately, it is fixable without replacing the entire window. A professional can drill tiny holes into the glass and then spray the inside of the window with a specially-formulated cleaning solution. The moisture is then removed from the window. Additionally, an anti-fogger can be installed to prevent the accumulation of moisture from happening again.
Condensation may also occur between the windows due to air leakage, or other causes outside the window. If this is the case, it will likely take longer for moisture to gather in the window, as the air will need to be sufficiently warm for the water molecules to vaporise. In these instances it is recommended to replace the double glazed windows instead of trying to repair the seals on the existing units.
Double-glazed glass windows are composed of two or more pieces of tempered insulated glass, which are joined by a metal framework. The gap in the middle of the window is filled with a non-toxic gas for insulation like argon or Krypton and then sealed. The seal stops the insulating gases from escaping and also prevents moisture and air from entering the gap.
As windows age, seals may be damaged, allowing moisture to enter between the glass panes. When the seals leak, it is important to be aware of this since it means that the double glazing is no longer performing the way it did in the past. This can lead to an increase in energy efficiency, increased heating bills, damage to property and the possibility of condensation forming between the windows.
Mist
It is perfectly normal to see condensation appear on your windows. This indicates that your double glazing system is working properly and is keeping the heat inside your home. The condensation forms because the air outside is warmer than the glass, and reaches its dew point before the window. This is one of the major advantages of having high quality double glazing.
If you notice condensation on the inside of your window, this could be an indication of a ventilation issue within your home. The moisture that is accumulating can't go anywhere else and will end in the window, carpets furniture, and other parts of your home. Getting this checked out by an expert and ensuring that there plenty of fresh air moving through the home will help avoid it from happening in the future.
Another reason for mist to appear on double-glazed windows is that the seal between two glass panes has been broken. This can be due to wear and tear or chemical cleaning solutions being used. The best option is to get the windows repaired in the shortest time possible.
Repairing your windows professionally will ensure that they are fog-free free of condensation and free of misting. It is also less expensive than replacing the windows, and you'll save money on your energy bills.
A window installer registered with FENSA can provide you with a price to repair or replace your double glazed Windows. If your existing windows are old and have been in use for a while you may want to consider upgrading them to new A-rated energy efficient ones.
It is a very good idea to keep copies of any warranties or agreements with your window fitters. It can be helpful in the event that you experience any problems with your windows. Contact your window fitters to resolve the problem. This is a better alternative to simply ignoring the problems that will only get worse and could lead to other problems in the home.
Difficulty to Open or Close
Double-glazed windows are difficult to open and close, it's not just an inconvenience, it can lead to an increase in energy costs due to loss of heat and drafts. It could also be a security risk, especially when the locks aren't working properly. You should fix any double-glazed windows and doors as soon as possible.
If you can't open your window and you've tried the simplest of fixes such as using a screwdriver in order to break it open or tapping around the frame using a sharp object, then the problem may be more serious. The window may have shifted and needs to be reset or there may be a gap between glass and frames. In any case, it is recommended to seek out an experienced double glazing repair expert to make sure that the proper repairs are made and to prevent any further problems.
It is not uncommon for UPVC window handles and lock mechanisms to become difficult to operate or get stuck, especially if they are old and worn. This is due to an accumulation of grease or dirt inside the handle. This can be solved by cleaning it using a uPVC cleaner. If this doesn't work, you could try tapping the uPVC using the screwdriver. Be careful not to harm the handle or the window handle mechanism.
If this does not solve the issue it is likely that the window needs to be replaced because the hinges may not be in the correct position or the locking mechanism might have been damaged. In this instance you should speak to a UPVC window specialist.
David The Window Wizard is a specialist in double-glazed door and window repairs, including fixing windows that are double-glazed and have been blocked or locked. He has extensive experience with the conversion of old window mechanisms into modern ones. This can often save you the cost of replacing the entire window. Call or email us today for more information or a no-cost quote.
Warping
Double-glazed windows are usually an excellent option to save energy in your home. They are composed of two separate panes that contain a spacer or dense gas between them. This creates a seal that keeps cold air out and warm air inside. However, over time, these windows can become damaged or upvc window repair broken and require repair. Most of these repairs can be done without the need to replace the entire window.
Warping is a frequent issue with double-glazed windows. This happens when the windows begin to bow or twist, or bow. This can affect the structural integrity and insulating capabilities of the window. Double-glazed windows should be properly installed and maintained to avoid this problem.
If your double-glazed windows are starting to crack, it's important to contact a specialist immediately to stop the problem from getting worse. They will be able to inspect your windows to determine the root cause. They will then use special tools to correct the issue and ensure that your windows are sealed.
Water vapour can trigger this issue, since it can build up between the windows over time. This could be due to various factors, such as the weather as well as humidity levels and temperature changes. To fix this problem the expert will drill a small hole to release moisture. They will then apply an agent for cleaning to wash the glass and then apply an adhesive to keep it dry in the future.
If your windows cannot be shut or opened it could be due to a broken mechanism or hinges. It is worth trying to lubricate these areas of the window prior to calling a professional as this may resolve the issue and decrease the need for replacements. If your windows are dated or don't provide the insulation you desire it might be better to replace them.